Our AC Power Parts Page is setup to link the product to our Buy it now ( PayPal ) Page by clicking on the picture of the product you wish to buy.
Only a few of the parts are set up this way at this time. For those that are as yet not linked. Please send an e-mail to <mail@jenatek.com> for your desire to buy them.

Safety note:

All AC powerline voltage parts, plugs, and outlets MUST be installed and used in accordance with all applicable building codes and electrical requirements, using ONLY copper wire. Household AC voltage and current can kill! If you have ANY doubt about your ability to correctly and safely install or use these parts, refer installation to a qualified electrical technician.

Note: Marinco® and Hubbell® are registered trademarks of their respective companies.

Our goal is to provide the most reliable and best-suited parts available. All of them are fully treated by liquid nitrogen immersion. We do not stop at vapor treatment—which is, by definition, above -320 degrees. We take them deeper. This process takes several days to complete.


#1  Duplex wall outlet, 15-20 Amp, by Hubbell®            
$30.00 each
(Special note: This by far is the most popular of all of our DIY electrical components you can buy from us... we were surprised as to how popular it has become.)
Ultra high conductivity copper alloy.
Liquid Nitrogen Deep Immersion Cryogenic treated.
Special 20 Amp ultra high conductivity copper alloy, not stocked at Hubble distributors. Black Only.

( Here is an independent "mini review" from just one of our customers... this is not an unusual response. )

from an e-mail:

-------    Hey, Jen:

I just finished comparing your outlets to the much-hyped Oyaide R-1. It’s the first time I’ve really been able to compare them at length—and, through headphones, I was really able to hear the differences.

Long story short, the Oyaide is initially more impressive, possessing a seeming sparkle in the treble that yours doesn’t. It also seems faster at first blush. But after a few swaps, it became clear that the Oyaide was pushing the treble forward, thus the perception of increased detail and sparkle. Everything I heard through the Oyaide I easily heard through yours, but the tonal balance of yours was less forward in the mids and treble. Neither outlet was irritating or harsh, but yours just seemed more natural, with the different parts of the frequency spectrum more in harmony with one another. In a word, more coherent.

These weren’t big differences, but they were audible. The comparison was very instructive. Anyway, thought you’d like to know. Have a great day!

Andy


#2 "NEMA' A-C power cord socket, by Marinco®                 
$30.00  each
Extension cord outlet end, single 15A
Liquid Nitrogen Deep Immersion Cryogenic treated
Similar to the Marinco® plug above, but in the 'female' configuration. This is the ideal item to complete your own very high quality 'extension cords'.  It features a single female 'outlet' and the same easy to terminate construction found in all the Marinco® products. Of course, it is Deep Immersion Cryogenic treated for enhanced conductivity and better sound.


 #3 "NEMA' A-C power cord plug, by Marinco®                    
$25.00 each
Plugs into wall outlet. Black body  Liquid Nitrogen Deep Immersion Cryogenic treated.
This great Marinco® power plug might look familiar to you. It is the same plug offered by Wattgate®  It is actually made by California based Marinco®, a large company that manufactures hundreds of power plugs, sockets and power distribution products.  The JENA LABS® Deep Immersion Cryogenic treatment radically improves the sound of the Marinco® plug!
 



"IEC" World Standard



 #4 'IEC' 15 AMP A-C power cord connector, by Marinco®
$40.00 each

Plugs into 15 AMP power inlet on audio gear.  Liquid Nitrogen Deep Immersion Cryogenic treated.
This ultra high quality connector is made by California based Marinco®, a company that manufactures hundreds of power plugs, sockets, and power distribution products It is the same connector offered by Wattgate®  In their print media ads, Wattgate® claims to have spent 2 years developing this part. Maybe they looked through catalogs for two years to find it, as Marinco® has had this part available for some time.  Wattgate® buys the stock Marinco® part, then hot stamp the words 'audio grade' and a 'blue star' graphic into it. After comparing, audiophiles agree that a stock Marinco part sounds better than their high price version, and that the JENA LABS Deep Immersion Cryogenic treatment radically improves the sound of the Marinco® connector. 





20 AMP IEC "World Standard"


 #5 'IEC' 20 AMP A-C power cord connector, by Hubbell®
$40.00 each
Plugs into 20 AMP power inlet on audio equipment and A-C line conditioners. Liquid Nitrogen Deep Immersion Cryogenic treated.
More and more audio equipment is now being offered with the superior 20 AMP size A-C power inlet. This is the cord-end connector that fits! In addition to the higher power rating, this connector set fits much more securely into the power inlet than the traditional smaller 15 AMP size.
NOTE:
This is the plug that we use for all of our AC power cords for all our AC power conditioner and distribution boxes.    


#6 'IEC' 20 AMP A-C panel-mount power inlet connector, by Hubbell®      
$25.00 each
20 AMP power inlet for audio equipment and A-C line conditioners. Liquid Nitrogen Deep Immersion Cryogenic treated.
In addition to the higher power rating and better sound, this connector socket holds the mating cord much more securely than the traditional, smaller 15 AMP size. With this part and the corresponding connector, you may now easily upgrade your audio equipment A-C power inlet to this superior format.
NOTE:
This is the inlet socket that we use for all of our AC power conditioner boxes and distribution boxes.