dussy jumpers

Note: Jumpers are not Interconnects for component to component connections see our Interconnects page.
   Want a pair of Interconnects that are the general size of these Jumpers below?....
    ... We have a new product called the "Elan" price $105.00 ...

    What are jumpers? jumpers in use

.
                 Used on the back panels of specific gear they enable direct connection of Pre to Main Amplifier paths were the ground is already established internally.
The signal path is through the center pin connection, when a electrical path from shield to shield is not needed or to be avoided.
        Based on numerous requests for an ultra-compact version of our acclaimed Dussy RCA jumpers, we’ve introduced the "Thin Man" series of jumpers, specifically designed for vintage audio gear and other applications where side-to-side connector spacing is at a premium.

    For our Thin Man jumpers, we use the smallest Cardas RCA connector available. These new jumpers have the same basic dimensions as our standard jumpers, but the backside has been machined to make them thinner to accommodate the tighter spacing on many vintage and even newer amplifiers. The really good news? All the performance of the standard version has been maintained.
    Dussy and Thin Man

Our customers are already raving:

“The jumpers have arrived and they work great, fit beautifully. I think you have a winner with these. Thank you for making the changes.”

“There are a lot of people with high grade vintage equipment that this product will appeal to. I really like them. This is definitely the best and easiest upgrade you can make to your system.”

As with our Dussy jumpers, there is no preferred directionality for the Thin Man, so there’s no need to fuss with making sure they’re correctly oriented. Simply remove the formed solid wire bar that connects the Preamp Out/Power Amp In RCA jacks on the back of your amplifier, replace them with our jumpers, and be prepared to experience a revelation that will make even the most hardened ears blush.

There is simply no longer any need for your amplifier to be starved sonically just because it has tight connector spacing. It’s the Thin Man to the rescue!

Please note: As with all connectors, make sure that the jumper cables are fully seated into the mating component for the most secure connection.

The Price of a set of "Dussy" RCA Jumpers OR the "Thin Man" Jumpers for Integrated Amplifiers is $65.00 plus $7.00 shipping to the lower 48 states.
Shipment pricing vary some outside of the United States, We will honor the standard shipping charge for the time being on most countries basis.

note: Italy has special requirements that make the price of shipping to Italy $26.00 - please e-mail for arrangements.

Important.. !!
The selection below shows a selection of type, either the "Dussy" standard or the "Thin Man" ultra narrow connectors!
Select which you would like first, then click Buy Now!