General features of our AC power cords.

• Practical functionality and safety with predictable results from industrial grade components.
• Full-immersion cryogenic treatment of critical electrical performance parts
• Fabrication to the highest standards exceeding all conventions for their AC rated use.
• Clamped connector ends and exceptional electrical connectivity with Cardas Quad Eutectic soldering.
  
• Wire is finest stranded copper TFFN machine tool grade available anywhere.
• Basic Cryo Power Cord uses Seoprene® (Mil Spec) for the cord material.
• T he Ferrite Power Cord uses a special compound surrounding the wires, a unique feature designed to help eliminate line hash and noise
  
• Connectors are internally filled with a high-grade dielectric potting that results in extreme durability and very long life.
• Our standards in braiding conventions result in far greater flexibility than the usual expectations in audio power cords.
• EVERY power cord is handmade and hand-tested for correct polarity and functionality under real AC power conditions.
• Both US and EU types offered.
  

Below is information on the Braided Power Cords:   
US and EU standards "NEMA" "Schuko CEE 7/7" and the AU power plugs are made to the same JENA Standards  

Sometimes called the Royal or the 916 Royal.
Above: NEMA type B 120V Grounded - IEC.

Below: EU "Schuko" - IEC

.

Schuko plugs, CEE 7/7  are a hybrid version with an extra hole ("CEE 7/7") that also accommodates the earth pin of French sockets.

This plug is dependent on the socket to be Polarized, Un-polarized, grounded, Un-grounded... Our Schuko does it all.

We custom modify or produce our own parts for all of the power cords we make.

As an example on the above shown cord...  the seal gasket on the back-shell of the Schuko plug, we make our own gasket seal.

. Attention to details like this is just one of the things customers of ours just expect.

The internals of the Plugs are Soldered with Cardas Quad Eutectic Solder, comprised of a unique blend of tin, lead, silver and copper. The Life expectancy of soldered connections using a Quad Eutectic solder is many many times that of inferior "Pb Free" junk solder prone to Failures due to shock cracking, whiskers and oxide degeneration and general short life before failure.  Rest assured our products will be just as useful 20 years or more.

below:  We do make the cords by hand, no bulk cable and it is a bit labor intensive. 

Our Standard Wall plugs are always potted with an industrial grade dielectric plastic for both mechanical stability, electrical performance and reduced oxidation of wires.

. .

The 1116-20 is the 20 Amp version with a 20 Amp IEC end and Our Standard Hubble NEMA plug or the Shuko 77 which is very capable for 20 amp heavy duty uses.

 Guide 1 - Suggested functional uses of Jena Technologies Braided Power Cords..

Function / Type / Colors	Name	Grounded 2 pole + ground = yes 2 pole Ungrounded = no	Recommended use	Price
Medium Duty - Braided   Purple and Black	The 916  Royal Power Schuko	YES all - modern EU type Country Specifications vary	Best sound in a 16 amp IEC For all "front end" components and Power Amplifiers to 16 Amps	$1,000.00
Medium Duty - Braided   Purple and Black	The 916  Royal Power	YES	Best sound in a 15 amp IEC For all "front end" components and Power Amplifiers to 15 Amps	$900.00
Medium Duty - Braided Purple and Black	The 816  Royal Power - Ungrounded	NO	Best sound in a 15 amp IEC  Special Purpose 2 pole ! UNGROUNDED !	$900.00
Extra Heavy Duty - Braided   Purple and Black	The 1116-20   Royal Power - 20	YES	20 AMP IEC ONLY Best Sound in 20 Amp IEC class	$1,000.00
Special Note:	All models:	All models:	Special Note: Each Additional foot over all standard of 6 Feet.	$50.00

.

New product Anouncement.
    Ferrite Low Noise power cord
       ..
       Looks like a standard power cord except its not standard at all.
    The 14 gauge wires are surrounded by a special ferrite compound to improve its ability to reject noise on the AC line.
    This product is pretty unique in that it is a filter of high frequency hash found on AC Lines today.
    It is not designed to replace any of the filters we produce... however it is a significant improvement over using nothing at all and does not cost as much as a high end conditioner.
    Price  2 to 6 ft power cords are $500.00 and additional price per ft over 6 ft is $20.00  per/ft  Manufacturing limit is at this time is a 10 ft power cord. 
      

...

About Seoprene® used in the Basic Cryo power cord.
Note: the Basic power cord is not the Ferrite power cord

Features:
Flexible and tough jacket. Offers -50°C to 105°C temperature extremes. Seoprene offers excellent abrasion, ozone, sunlight, chemical and oil resistance as well as water and mold resistant non-wicking lightweight polypropylene fillers. Water resistant with high dielectric insulation. Lightweight, long lasting, easy to carry and easy to handle. 

Applications:
Special uses requiring flexibility and mechanical toughness, high environmental resistance and flame retardation.

Industry Approvals:
Federal and Military use under Federal Spec. JC-580B. UL Listed SEOOW 600V and SJEOOW 300V to NEC Article 400, CSA certified STOOW or SJTOOW (TPE) -50°C to 105°C. MSHA approval for flame resistance for mining applications.

As the Internally Soldered connections are of a non degrading or failure prone "Lead Free and inferior" product these are fit for high reliability applications as long as undamaged from mechanical stresses, each one is hand tested for proper electrical function and polarity.

Boldly simple yet absolutely reliable.

15 amp IEC versions Price is $200.00 for the standard Length of 2 to 6 ft. 
and each additional foot if desired is $10.00 added to the normal price.

20 Amp IEC versions Price is $220.00 for the standard Length of 2 to 6 ft.
and each additional foot if desired is $10.00 added to the normal price.

Power conditioner Power cord Products from JENA

• All AC power cord conditioners are approximately 6 to 7 ft. as standard length. Other lengths available as custom order. Please call for quotation.

    The Model One .2
.. .

    We took our most popular high-performance power cords in both 15 and 20A designs and the basic circuit schematic of the 6.1/3.1 power conditioning Washing Machines and melded them into a new, high-performance AC power cord conditioner filter. In addition, the components are mounted on an enhanced PC board, and protection is provided by special, very expensive, compact 20A internal fuses instead of a 20A breaker. The end result is simply extraordinary ... It is the “Model ONE.2"
 MSRP - $1,800.00

    These are made for specific voltages!!  120 VAC Hot-Neutral-Ground as US AC power Standard.  Let us know if different.

  And the newest design feature dual outputs...
  .
Price for the Model One.2 Dual output is $2300.00 MSRP

5 generations of development and we still lead the industry with a new filter just for the owners of Boulder Products...

 The Granite, designed for
Boulder Amplifiers  

.
 The Granite, Model One.2 - Price $1,900.00

  Latest version are 90 degree offset outputs $2,150.00 Each.  (e-mail before ordering these are special order only)
    Build time is about 6 weeks
..

 


And now ... The "Easy One.2"

Coming close to the performance of our standard-setting One, the Easy One has the same filter circuit, connectors, box, and strain relief as the One, but instead of our braided design, we use the best JENA Cryo Conductors International high grade stranded copper wire cord jacketed with Seoprene®- insulation on the copper stranded wires. In addition, the components are mounted on an enhanced PC board, and protection is provided by special, very expensive, compact 20A internal fuses instead of a 20A breaker.

About Seoprene®

Features:

• Flexible and tough jacket. Offers -50°C to 105°C temperature extremes. Seoprene offers excellent abrasion, ozone, sunlight, chemical and oil resistance as well as water and mold resistant non-wicking lightweight polypropylene fillers. Water resistant with high dielectric insulation. Lightweight, long lasting, easy to carry and easy to handle. All components are recyclable and non-hazardous for environmental landfill disposal. Color coded conductors for easy identification.

Applications:

• Special uses requiring flexibility and mechanical toughness, high environmental resistance and flame retardation. Push button remote controls. Motor control, stage equipment and lighting. Industrial control and robotic systems. Outdoor applications. Suitable and approved for submersion in water.

Industry Approvals:

• Federal and Military use under Federal Spec. JC-580B. UL Listed SEOOW 600V and SJEOOW 300V to NEC Article 400, CSA certified STOOW or SJTOOW (TPE) -50°C to 105°C. MSHA approval for flame resistance for mining applications.

.  

     The Easy One.2     $1,300.00 

.    

The Easy One power conditioner is available in IEC 15A and 20A versions.

The "Easy One.2" is $1,300.00

And we offer a dual output for the Easy One.2 Dual Out

Easy One.2 Dual Out is $1,500.00

 

Updated Dec 3nd, 2011

                Welcome to our AC Power Cord and AC Power Cord with built in Conditioners page
                Absolutely Made in the USA   With the highest standards of build supreme and foremost in importance.